Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your Window repair is damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor, where they could be trampled.

It's a good idea to seal the gap after the glass is removed. This will keep water and drafts from entering your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sliding. A sagging window can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows so you can access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen up. The majority of the time, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose upvc window repair near me window handle yourself. First, you'll need to close the window and perform an initial test fit. The corners of the sash should align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is important to act if you wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, upvc window repair near me window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze it could be the hinges that are at fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem can be caused by opening the window improperly or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are happy to provide advice.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also due to wear and tear may become displaced, which causes an opening to appear where the sash meets the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. The interlock, which is located on the hinge side of the window, may also become misaligned, again it's feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through these gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. If you encounter any issues with your upvc window you should consult an expert as soon as possible.