Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need source some plastic spacers to aid the new pane in being able to fit properly into the window frame.

If you plan attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you might think about a security door repair that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit, window repairs you can tighten the screws until they stay in place.

If you cannot reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Most often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be put on. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, Window repairs or are loose and blow open in a breeze, it may be hinges at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, creating a gap where the sash meets frame. If they are damaged beyond repair, it could be required to realign them. The interlock may be disaligned. This happens on the hinge's side and might require to be cleaned. In some instances it is possible to replace these.

The next common reason for draughts are the window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be placed on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as possible.