UPVC Window Handle Replacement

It's easy to repair a damaged double glazed window replacement handle with the right tools. It is important to identify the kind of handle you have as well as the size of its spindle before you purchase the replacement.

Older uPVC windows feature handles with cockspurs, which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and must be to be replaced with the same handle.

What type of lock and handle do I need?

There are many kinds of window handles made of upvc and locks, each with its particular advantages and uses. The type of handle that you choose will determine if your locking mechanism is effective and also if it is simple to open the windows. As time passes, and with regular use the handles made of upvc on your windows could get worn out and damaged. This makes them less secure and effective. In certain instances, they might even fall completely off. It is important to repair the handles on your window made of upvc when you see they are falling off. This will help stop potential burglaries and ensure your home is secure.

It's a simple job that anyone can complete. You'll require a few tools, but with the proper knowledge, it's a straightforward process that should only take a few minutes. To begin you'll need to determine the kind of lock and handle you have on your window made of upvc to help you identify the best replacement.

Inline Espagnolette Handles

These are the most common kind of upvc handle and are typically located on the other side of your window. They are flat in design and feature a latch that engages with the locking mechanism of the frame of the window when it is turned. Inline upvc handles feature an elongated spindle that runs through middle of the handle to the window frame in order to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles have one screw that holds the handle to the frame and aren't as secure as other types of window handles.

Handles that can tilt and turn

The tilt and turn handles differ from other handles made of upvc in that they can be turned to open the window and then lowered into the window to ventilate. In general, they have a 7mm spindle on the back of the handle. They are available in both left and right-handed versions.

It is crucial to determine the size of the spindle when purchasing a double glazing replacement window upvc handle. Not all of them are exactly the same size. Drop something in the middle of the hole to measure the length. This is the maximum size of spindle that will fit in your windows.

What is the spindle?

uPVC window handles operate similarly as doors, with the user turning the handle to operate a latch inside the frame. The window can then be opened and shut. The handles could be damaged, especially if they're often used or are exposed to harsh conditions. This can lead to the need to replace your uPVC handles on windows since they might not operate the window in a proper manner anymore.

There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit in the uPVC frames in different ways and each handle type uses a specific spindle to lock the mechanism into the window. This is why it is important to identify the kind of handle you have installed on your uPVC window to find the right replacement for it.

You can check what type of uPVC handle you have by looking at the base section of your handle. A snap-in covers should be over the screw that holds the handle's base in position. Remove this and then you should be able see the second screw located at the opposite end of the base section of the handle. After both screws are removed you should be capable of pulling the handle away from the uPVC window.

After removing the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You'll need buy a replacement of the same length as the handle that was originally used and locking device.

The spindle wears down and is unable to operate the locking mechanism. This can be caused by corrosion, damage from continuous use, or even the locking mechanism becoming looser. If this occurs, you will need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles can become damaged or destroyed over time. It is crucial to repair them as quickly as you can to ensure your security. It is easy to replace a damaged or worn handle. The task can be completed in less than one minute without the need for special tools.

The first step in removing the handle that was previously used is to take off the screw located on the top of the base of the handle. Once the screw is removed, the handle can be removed. A second screw will be located at the bottom of the handle. This can also be removed. Once these two screws are removed, the handle can be removed from the window's base.

Once the old handle is removed, grab the new handle and line up the fixing holes with the holes present in the window frame. If there is a sticker or cap on the new handle, take it off it if needed and put the handle back in the appropriate position. Once the handle is in place, it is essential to check that it works by turning the handle and making sure that the lock mechanism is activated.

Espag handles have an extra spindle that is protruding from the handle and upvc window handle replacement slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom bar crossmember.

Once you have the new handle in place, you can insert the spindle into the window lock and then tighten it. Replace the snap-in cover and screw cap (if appropriate) once the handle is fixed. Once the handle is in use, open and close the window a couple of times to make sure it is working properly and securely.

How do I install the new handle?

Switching your uPVC window handle isn't difficult and the process is quite simple. All you need is a screwdriver and a little bit of patience. First, make sure that the old handle is unlocked. Remove any visible screws. You could also replace them with screw caps. After removing the handle, you'll need to record the length of the spindle which extends from the back. This is important because it will determine the kind of handle to purchase.

Espagnolette handles on uPVC are the most sought-after kind of handle. The spindle passes through the handle to operate the locking mechanism inside the frame of the window. When the handle is turned, it opens the latch on the window and allows it to open. During regular use and time, handles made of espagnolette can become damaged.

Cadenza handles are a type of uPVC handle that is usually employed with tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism within the window. They are generally more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced using the same method as you would with espagnolette handles, but make sure the new handle is not angled and flat.

Once you have determined the right handle for you, you can simply line up the new handle with the screw holes and then screw it into the appropriate position. You should then put the screws back on and test that the new handle is working properly. This is done by moving the handle from locked position to the unlocked and the reverse direction several times. If you have any issues, it may be worth contacting a specialist to see if they are able to help resolve the problem. They can provide advice on how to fix the problem in a timely and efficient manner.